Remanufactured SHACKMAN X3000 6×4 Tipper Truck

Reman SHAKMAN Truck Description

• REMAN ROAD remanufactured SHACKMAN truck X3000 follows the principle of “performance recovery rather than partial fault fixing”.
• After complete disassembly, all components are classified by quantitative wear indicators. Reusable parts go through precision cleaning and performance tuning; repairable structural parts adopt straightening, overlay‑welding and machining recovery; parts reaching scrap standard are directly replaced.

• The tipper box deformation is corrected, vulnerable stress points are locally reinforced, and the whole‑vehicle circuit is sorted out and optimized.
• Every finished reman X3000 truck carries VIN‑corresponding reman inspection files, which facilitates overseas customers to carry out equipment acceptance, asset statistics and later maintenance planning.

Full Technical Parameter Table

• Name: Reman SHACMAN 6×4 X3000 Dump Truck
• Overall Dimension (mm): 8480×2550×3390, main frame metal‑fatigue eliminated, high‑stress welding seams reinforced
• Drive Type: 6×4 dump truck chassis; ultrasonic crack detection for frame bin‑mount stress zones
• Tyre Spec: 10 pcs off‑road mixed‑pattern radial tires; damaged tires replaced, wheel hub inspection completed
• Engine: Weichai diesel engine; component‑level reman, wear‑value measurement, power‑torque recalibration, fault codes cleared
• Axles: 1 steer axle +2 heavy‑duty rear drive axles; disassembly inspection, gear gap adjusted, differential‑lock function verified
• Transmission: 12‑speed manual gearbox; gear clearance inspected, failed synchronizer assemblies replaced, shifting performance debugged
• Suspension: Heavy‑duty leaf‑spring suspension; bushings and shock absorbers measured and renewed according to wear limits
• Dump Cargo Bin: High‑strength steel tipper bin; worn areas overlay‑welded, deformed panels straightened, weld seam flaw‑detected
• Hydraulic Lifting System: Front‑mounted lifting cylinder; circuit full flushing, seals & high‑pressure hoses renewed, lifting‑dumping cycle calibrated
• Air‑Brake System: Dual‑circuit air brake with ABS; full overhaul, air tightness test, loaded‑simulated braking validation
• Driver Cabin: SHACMAN X3000 ergonomic engineering cab; mounting checked, wiring harness reorganized, sealing strips updated
• Remanufacturing Standard: Full‑vehicle disassembly, multi‑level component screening, multi‑scene durability test, complete overhaul documentation

Truck Remanufacturing Process

• Whole‑vehicle condition audit & technical benchmark setting
  Carry out real‑load road test, record power output, lifting efficiency and braking status. Complete non‑destructive inspection for frame and tipper‑box welding seams. Measure wear clearance of core moving parts, formulate repair benchmark referring to original factory wear‑limit specifications, and clarify replacement, repair and retention scope of each assembly.
• Full disassembly and multi‑level component classification
  Disassemble the whole vehicle down to single‑component level. Divide all spare‑parts into three categories: qualified reusable after deep cleaning; repairable via straightening, overlay‑welding or precision machining; must‑replace when exceeding wear threshold. Isolate severely fatigued structural parts and aging hydraulic components.
• Component repair, reassembly and cross‑assembly system matching debugging
  Implement restoration processing for repairable parts. Reassemble engine, gearbox and axles strictly following factory torque requirements. Reinforce tipper‑box high‑stress zones, assemble renewed hydraulic components. Focus on cross‑system matching: adjust powertrain output curve, lifting speed and suspension posture, eliminate performance inconsistency caused by mixing old and new components.
• Multi‑scene validation and reman‑data filing before delivery
  Conduct static hydraulic cycle test, no‑load road test and simulated heavy‑payload dumping test. Verify power response, braking stability, dumping smoothness and zero‑leakage of hydraulic circuit. Only reman Shacman truck for sale meeting all quantitative indicators enter final anti‑corrosion painting. Archive component‑processing data bound with vehicle VIN for delivery together with the truck.

Why Choose Reman SHACKMAN Truck?

• For engineering fleets and material‑transport enterprises, brand‑new SHACMAN X3000 dump trucks mean huge one‑time capital occupation, together with long production and delivery cycles, which brings pressure for projects with tight schedules and constrained cash flow.
• Second‑hand or merely refurbished tippers have low procurement costs, however, most of them lack standardized component screening. Subtle structural cracks, power attenuation and hydraulic aging may erupt at critical construction stages, triggering project delay and additional repair expense.
• REMAN ROAD reman X3000 truck fills this market gap. It implements quantitative restoration for frame, powertrain, axle group and hydraulic lifting system, and passes multi‑dimensional pre‑delivery verification.
• Customers can acquire high‑reliability construction equipment at much lower cost than new trucks. Meanwhile traceable reman inspection records support cross‑border project acceptance and internal fleet asset management, effectively balancing procurement expenditure, equipment reliability and delivery lead‑time.

Other Remanufactured Truck

• To accommodate the vastly different haulage needs of global fleet operators, mining contractors and engineering companies, Reman Road stocks a wide selection of remanufactured trucks from two industry-leading brands: SINOTRUK HOWO and SHACMAN.
• Our extensive range includes rebuilt 6×4/8×4 tipper trucks for mine stone transport, long-distance tractor heads for cross-border container freight, enclosed cargo & fence trucks for general goods, plus multi-functional special vehicles such as liquid tankers, concrete mixers and sanitation trucks.