Reman Howo 340 6×4 Concrete Mixer Truck

Reman Mixer Trucks Description:

• This REMAN ROAD reman mixer trucks has gone through a systematic full‑vehicle remanufacturing workflow instead of simple surface renovation.
• Its powertrain has been disassembled, worn components replaced and bench‑tested to restore factory‑level power stability and fuel economy.
• The mixing tank, hydraulic drive unit, reducer and water supply system have all been overhauled, ensuring continuous and uniform rotation to prevent concrete solidification.

• The reinforced frame and heavy‑load axles grant outstanding load‑bearing capacity on rough construction‑site roads.
• After multi‑round road tests and drum operation verification, this reman concrete mixer trucks balances dependable performance and low‑investment cost.

Specification Table:

• Name: Reman Sinotruk Transit Mixer Truck 340 6×4
• Drive Type: 6×4 chassis; ultrasonic fatigue inspection on main frame and cross‑members
• Engine: Sinotruk HOWO diesel engine, 340 HP; component‑level reman, wear‑gap measurement, power recalibration, fault‑code clearing
• Transmission: 10‑speed /12‑speed manual gearbox; gear‑backlash inspection, worn synchronizer replaced, shift performance debugged
• Axles: 1 steering axles + 2 heavy‑duty rear drive axles; full disassembly inspection, gear‑gap adjustment, differential‑lock tested
• Mixing Drum Volume: 8‑12 CBM; drum inner wall & spiral blades inspected, residue cleaned, damaged blades repaired or replaced, leakage test completed
• Hydraulic Mixing System: Hydraulic motor, reducer & oil pump fully disassembled, serviced, worn seals renewed; rotation speed calibrated
• Water‑Supply System: Water tank, pipelines and control valves inspected, cleaned and pressure‑tested
• Suspension: Heavy‑duty leaf‑spring suspension; rubber bushings and shock absorbers renewed, steering geometry recalibrated
• Tires: 10 off‑road radial tires; defective tires replaced, wheel‑hub bearing inspection finished
• Cab: Original HOWO standard cabin; mounting‑bracket inspection, wiring reorganized, sealing strips renewed
• Braking System: Dual‑circuit air brake system; complete overhaul, brake pipelines replaced, air‑tightness test, full‑load brake validation

Mixer Truck Reman Workflow:

• Pre‑teardown combined chassis & mixing‑system diagnostic audit
  Before disassembly, technicians carry out a full road test plus mixing‑drum running inspection. Engineers check engine power, brake performance, hydraulic drum rotation stability, leakage status and chassis vibration, mark high‑wear risk areas, then create a dedicated restoration plan covering both chassis and upper mixing superstructure.
• Full disassembly and two‑part component grading screening
  The whole truck is split into chassis group and mixing superstructure group. Every mechanical part from engine, axles, suspension, hydraulic pump, reducer, drum blades and pipelines is measured and inspected for cracks, deformation and wear loss. Components are sorted as reusable after deep industrial cleaning, repairable by precision machining, or discarded and replaced with new high‑quality spare‑parts. No critical worn‑out chassis or hydraulic component moves forward to reassembly.
• Integrated reassembly and cross‑system synchronization tuning
  The chassis powertrain, braking and suspension systems are rebuilt first. After chassis completion, the mixing drum, hydraulic motor, reducer, water‑supply assembly and discharge chute are installed and connected. Multi‑module calibration is performed to match engine power output with hydraulic‑drum rotation speed, ensuring coordinated, steady performance during heavy‑load concrete transport.
• Multi‑stage mixed‑function validation and document archiving
  Testing phases include static hydraulic leakage inspection, empty‑drum rotation trial, no‑load road drive, and simulated full‑load heavy‑cycle testing. Once all chassis and mixing‑system performance benchmarks are satisfied, anti‑corrosion painting is completed. Full remanufacturing inspection reports linked to the vehicle VIN are archived before delivery.

New VS Used VS Refurbished VS Reman Mixer Trucks

When sourcing concrete‑mixing equipment for construction fleets, there are major differences in service reliability, downtime risk and total‑life cost between brand‑new, ordinary used, refurbished and reman concrete mixer truck:

• Brand‑new mixer truck delivers zero‑wear components, factory warranty and the latest hydraulic‑system configuration, yet it requires very large one‑time spending and may face long delivery waiting periods.
• Second‑hand mixer truck has the lowest initial purchase price, but its mixing drum, hydraulic reducer and chassis fatigue status remain unknown; sudden hydraulic failure or drum‑sticking breakdowns at construction sites can cause costly concrete waste and project delays.
• Refurbished mixers usually receive only surface cleaning, cosmetic painting and replacement of obviously broken visible parts, without full disassembly of engine internals, drive axles or the complete hydraulic mixing package, leaving dangerous hidden wear risks untouched.
• REMAN ROAD reman Sinotruk transit mixer undergoes full teardown of both chassis powertrain and upper‑mount mixing equipment, strict dimension inspection to OEM standards, targeted renewal of worn critical components and multi‑stage full‑load mixing‑simulation testing.

REMAN ROAD reman concrete mixer trucks achieves near‑new working reliability for concrete transit cycles at a greatly reduced purchase price, making it a low‑risk, cost‑effective equipment choice for contractors and batching‑plant operators.

Why Choose Reman Concrete Mixer Trucks?

• Significantly lower upfront investment for complete mixer equipment
  Gain a fully functional chassis‑plus‑drum concrete mixer unit at far less cost than purchasing a brand‑new truck, preserving capital for raw‑material procurement and project expansion.
• Dual‑system deep restoration for both chassis and mixing superstructure
  Unlike regular second‑hand trucks, remanufacturing covers overhaul of the driving chassis as well as full service on the hydraulic drum, reducer and spiral‑blade assembly, removing hidden failures inside the mixing system.
• Restored stable mixing quality and cycle‑working durability
  Hydraulic‑system calibration brings back consistent, uniform drum‑rotation speed, preventing uneven concrete mixing and reducing residue accumulation inside the drum during repeated daily cycles.
• Strong site‑road adaptability after chassis reinforcement
  Multi‑axle suspension and drive components are renewed and tuned to cope with bumpy, dusty, unpaved construction‑site roads, cutting down suspension‑related breakdown risks.
• Readily available global spare‑part support
  The classic HOWO mixer platform enjoys widespread international parts supply for both chassis and hydraulic mixing accessories, shortening maintenance downtime on building‑site locations.
• Full traceable reman documentation for fleet asset management
  Each REMAN ROAD reman mixer trucks carries VIN‑bound restoration records for chassis and upper‑mount equipment, simplifying fleet maintenance scheduling, site‑acceptance checks and future resale procedures.